|
Výrobky sú klasifikované
|
Model
|
Priemerná veľkosť častíc (nm)
|
Čistota (%)
|
Špecifická povrchová plocha (m 2 / g)
|
Objemová hmotnosť (g / cm 3)
|
polymorfov
|
farba
|
|
nanotechnológie
|
DK-Al-001
|
50
|
> 99,9
|
20
|
0,23
|
guľovitý
|
čierna
|
|
submicronu
|
DK-Al-002
|
800
|
> 99,9
|
2
|
1.50
|
guľovitý
|
striebro
|
Hlavné charakteristiky nano-aluminum, ultra-fine aluminum powder prepared through a special process, high purity, spherical high impurity content of active aluminum accounted for more than 98%, yield, size distribution, surface area of high activity, easy to disperse use resin, rubber and other polymer materials.
Aplikácia
An efficient catalyst: nano-aluminum powder added to the solid fuel rocket, greatly improve the speed of fuel combustion to improve combustion stability;
Activated sintering additives: AlN powder mixed with 5 to 10% nano-aluminum body to reduce the sintering temperature, sintered density and thermal conductivity; nano-aluminum integrated components of the substrate, the thermal conductivity about 10 times, can be solve the integrated components of integration.
Conductive surface coating of the three metals and scrap metal processing: nano-aluminum activated surface temperature below the powder melting point coating, under anaerobic conditions, this technique can be applied to the production of microelectronic devices.
Four widely used high-grade metal paint, composite materials (thermal spraying composite metal powder, ceramic composite steel pipe) military (filler), chemical (various catalysts, pesticides), metallurgy (aluminum thermal metallurgy steelmaking Deoxidizer), shipbuilding (conductive coating), refractory materials (steel-making furnaces, magnesia carbon bricks), new building materials (aerated concrete made gas agents), anti-corrosion materials, fireworks, and so on.
Technická podpora spoločnosti môžu poskytovať nano-hliník, ultra-jemný hliníkový prášok v tepelnej vodivosti živice, maľovať aditíva, podporu technológie práškovej metalurgie, a konkrétne informácie aplikácie, obráťte sa na obchodné oddelenie personálu.
Balenie, skladovanie Výrobok je inertným plynom antistatického obalu, musia byť uzavreté a skladované v suchom a chladnom prostredí, by nemali byť dlho vystavená vzduchu, vplyv anti-vlhkosti skupiny v rozptýlených výkonu sub-s
|
